Engine and transmission
|
|
Engine type: | 1 cylinders, Single |
Displacement: | 124 cc (7.58 cubic inches) |
Bore × stroke: | 2.05 inch × 2.31 inch (undersquare - longstroke) |
Cooling system: | Water cooled |
Throttle: | Cable operated |
Valves | |
Valves per cylinder: | 4 |
Fuel and ignition | |
Sparks per cylinder: | 1 |
Fuel supply system: | Fuel injection |
Ignition type: | TCI (Transistor Controlled Ignition) |
Compression: | 11.2:1 |
Engine mounting: | Transverse |
Lubrication system: | Wet sump |
Gear box: | Manual |
Clutch: | Wet, cable operated |
Final drive: | Belt |
Starter: | Electric |
Dimensions
|
|
Physical measures | |
Length: | 87.4 inch |
Width: | 30.6 inch |
Height: | 52.6 inch |
Wheel base: | 60.8 inch |
Ground clearance: | 5.31 inch |
Seat height: | 30.5 inch |
Chassis and suspension
|
|
Front | |
Suspension: | Cartridge |
Suspension travel: | 4.33 inch |
Brake: | Single Disk, Ø10.51 inch |
Tire: | 120 / 70 R15 |
Rear | |
Suspension travel: | 3.74 inch |
Brake: | Disk, Ø9.45 inch |
Tire: | 140 / 70 R14 |
Other
|
|
ABS available: | No |
Fuel capacity: | 3.12 gals |
Number of riders: | 2 persons |
Water cooled, 125cc, Single, DOHC |
Water cooled, 499cc, Inline-2, DOHC |
||
2010 Aprilia RS 50 R SBK Replica Water cooled, 49cc, Single, 2-stroke, Reed valve |
2013 Aprilia SR50 Race Replica Water cooled, Single, 2-stroke, Reed valve |